Toyota Alphard 2nd generation was produced in 2009, 2010, 2011, 2012, 2013, 2014 and 2015. During this time, the model was restyled. The sports version of this model is also known as Toyota Vellfire 20. In our article, you will find information describing the fuses and relays of Toyota Alphard 2 Vellfire with block diagrams, their locations and photo examples of execution. Let’s highlight the cigarette lighter fuse.

Blocks in the cabin

Left fuse box

There is a fuse box at the bottom of the instrument panel on the passenger side.

1 LH ECU-IG10A Body ECU, Electric Sliding Door
2 SEAT HTR LH10A Seat heating
3 GAUGE NO.210A Backlight
4 STP RR7.5A Brake light
5 STP HI MT7.5A High Mount Brake Light
6 STP RL7.5A Brake light
7 RR WIP15A Rear wiper
8 GAUGE NO.110A Instruments, Front Windscreen Wiper Defroster
9 PANEL10A Light Switch
10 TAIL210A Rear light, side lights
11 TAIL10A Rear light, side lights
12 P/SEAT LH30A Passenger seat
13 4WD7.5A All-wheel drive system
14 AC INV15A Additional socket
15 DR LOCK30A Body ECU
16 P/W FL20A Electric windows
17 S/R20A Moon Roof
18 PSD LH30A Electric Sliding Door
19 P/W RL20A Electric windows
20 PBD30A Electric rear door drive

Right fuse box

At the bottom of the panel, on the driver’s side, there is another block with fuses.

1 FR WIP30A Front Windscreen Wiper
2 SEAT HTR RH10A Seat heating (driver side)
3 RH ECU-IG10A Air Conditioner
4 P/SEAT RL25A Second seat passenger side
5 P/SEAT RR25A Second seat on the driver’s side
6 ECU-IG315A Seat Heater (Second Seat Driver Side)
7 P/POINT15A Accessory Socket
8 CIG15A Accessory Socket
9 RAD NO.27.5A Navigation system
10 ECU-ACC7.5A Outside mirror
11 IGN10A Ignition
12 MET7.5A Devices
13 PSB30A Pre-Collision Seat Belt
14 RR FOG7.5A Rear fog lights
15 P/W FR20A Electric windows
16 P/SEAT RH30A Driver’s seat
17 AM17.5A Driver Position Memory
18 STOP15A Stop light
19 OBD7.5A Diagnostic connector
20 PSD RH30A Electric Sliding Door
21 P/W RR20A Electric windows

Fuse number 8, 15A, is responsible for the operation of the cigarette lighter.

Some relays can be installed separately.

Block under the hood

In the engine compartment there may be 2 blocks with fuses and relays (left and right) and one with fuses (hybrid versions).

Block A

1 ABS NO.230A VSC Drive
2 DEF30A Rear window heating
3 EFI20A EFI
4 CAPACITOR15A Hybrid System
5 ECU-B10A Electric Sliding Door
6 DOME7.5A Interior lighting
7 RAD NO.115A Navigation system
8 MIR HTR10A Heated Mirrors
9 SLOPE NO.230A Tilt
9 ABS MAIN110A Brake system
10 ABS MAIN210A Brake system
11 ETC-S10A EFI
12 AM2 NO.27.5A Body ECU
13 TRN HAZ15A Turn signal, hazard warning lights
14 IG215A injection
15 ABS MAIN315A Brake system
16 FR DOOR30A Body ECU
17 A/F30A EFI
17 A/CW/P10A Air Conditioner

Scheme from the block cover with a description of the relay

1 HORN10A Signal
2 STRG LCK20A Steering wheel lock
3 AMP NO.230A Audio Amplifier
4 AMP NO.130A Audio Amplifier
5 ECU-B37.5A Smart ECU
6 ECU-B27.5A Air Conditioner
7 S/HORN10A Signal
8 DEICER20A Front Windscreen Wiper Defroster
9 FOG20A Front fog lights
10 H-LP RH *115A Right headlight (high beam)
10H-LP RL *215A Right headlight (low beam)
11 H-LP LH *115A Left headlight (high beam)
11 H-LP LL *215A Left headlight (low beam)
12 H-LP RL *115A Right headlight (low beam)
13 H-LP LL *115A Left headlight (low beam)
13 H-LP RH *215A Right headlight (high beam)
14 H-LP HI NO.2 *120A Automatic High Beam
14 H-LP LH *215A Left headlight (high beam)

Block C

Scheme

  1. 7.5A EFI NO.1 – Hybrid System
  2. 10A OIL PMP – Hybrid System
  3. 10A PCU – Hybrid System
  4. 7.5A IGCT NO.1 – Hybrid System
  5. 10A INV W/P – Hybrid System
  6. 7.5A IGCT NO.2 – Hybrid System
  7. 10A BATT FAN – Hybrid System