The 1st generation Kia Sorento SUV was produced in 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 and 2010. During this time, the Sorento 1 underwent restyling. In this publication, you will find a description of the fuses and relays of the Kia Sorento 1 with block diagrams and their locations. We note the cigarette lighter fuse.

The purpose of the elements in the blocks may differ from the one presented and depends on the equipment level and year of manufacture. Check the designations with your diagrams on the back of the protective cover.

Cabin block

It is located under the driver’s panel behind a protective cover.

Photo – example

Scheme Option 1

Description

W/SHD15A Front heater relay
S/ROOF20A Hatch block
START10A Transmission range switch (AT only), starter relay
HAZARD15A Hazard warning lamp
P/SCK (CTR)15A Central power outlet
CIGAR (FRT)15A Fuse
DRJOBD -II10A OBD-II Control Connector, Daytime Running Lights
WIPER FRT20A Windshield wiper, windshield heater relay, fuel filter relay, sunroof unit
P/SCK FRT.RR30A Front and rear power socket
WIPER (RR)10A Rear window wiper and washer switch, rear window wiper unit
ACC10A Cigarette lighter relay, plug socket relay
RELAY COIL10A Glass heater, cooling fan relay, air conditioner relay, headlight
TCCS20A Transfer box control unit
FOG (RR)15A Rear fog lamp (if equipped)
O/S MIRROR10A Electric mirrors, folding exterior rearview mirror control unit
ROOM LAMP10A Interior cargo compartment lighting, suspension bracket, central light, ceiling lights that turn on automatically when the door is opened, sun visor lighting
S/WARMER20A Heated front seats
PREMIUM AUDIO30A Audio device
STOP LAMP20A Parking light switch
TURN LAMP10A Turn signals, rear headlight control unit
A/BAG10A Airbag control unit
METER10A Instruments, reversing lamp, air conditioning control unit AQS sensor, transmission range switch (A/T only), ESAT control unit (A/T only)
TRAILER15A Trailer
ENGINE10A Engine control unit, speed sensor, transfer case control unit

The cigarette lighter is controlled by a fuse marked CIGAR (FRT) at 15A.

A signal relay, turn signals, etc. can be mounted separately under the panel.

Blocks under the hood

There are two fuse and relay blocks in the engine compartment.

Individual fuses or relays can be installed outside the units, for example, the air conditioning fan fuse is located in the Sorento 1 with a diesel engine behind the front bumper.

Main unit

Photo – example

Diagram (gasoline engine)

Diagram (diesel engine)

Purpose of fuses

FUEL15A Fuel pump relay
HORN15A Signal Relay
HEAD (HI)15A Headlamp, cluster
HEAD (LO)15A Headlight
H/LP WASH20A Headlight washer
H/BURN20A Fuel cabin heater
ECU10A engine and automatic transmission ECU, electric fan control system
02 (DN)15A Rear oxygen sensor
02 (UP)15A Front oxygen sensor
P/TRN10A Main relay, generator
P/W (LH)25A Electric left window control
P/W (RH)25A Electric right window control
DEF25A Heater relay
MAIN120A Generator
IGN140A Ignition key
IGN230A Starter relay, Ignition key
ABS40A ABS control unit
F/BLW30A Front Fan Relay
F/FOG15A Front fog light relay
EXT15A DRL, license plate light, side lights, turn signals

Relay designation

INJECTOR15A Engine control unit, EGR solenoid valve (if equipped), heater relay
BTN140A ROOM fuse 10A, TCCS fuse 20A, STOP fuse 15A, plug socket
BTN220A Rear fog lamp, Electric driver’s seat adjustment, heated front seat
BTN340A W/SHD 15A, D/Lock. Hazard 15A, S/Roof 20A, OBD-II 10A, driver seat fuse
CD/FAN
(C/FAN2)
30A Air conditioner relay, cooling fan relay (HI)
MEMORY10A ETACS, cluster, ESAT control unit, air conditioner unit, multi-purpose meter
AUDIO20A fuse 10A memory unit, rear window wiper control unit, audio equipment
(EXT)15A Fog light relay, license plate light, combined reversing light, parking light
ILLUMI10A DRL unit, Backlight, ignition switch, cigarette lighter light, emergency switch, clock, cluster, multi-purpose meter, power window switch, rear heater switch, rear window wiper and washer switch, sound system

Additional unit

Installed on the Kia Sorento 1 model with a diesel engine.

Example of a diagram on the back of the unit cover

Here are the fuses and relays responsible for engine operation (GLOW – glow plugs, W/HTR – auxiliary heater).